Manual Transaxle Removal And Installation: Console: Removal

Disable SIR system.
Apply parking brake lever.
Remove window mirror switch (if equipped).
1. Exert pressure on rear of window mirror switch with hand.
2. Pry up with blunt tool at rear retainer assembly tabs.
  
  Fig 1: Prying Up Window Mirror Switch
  Courtesy of GENERAL MOTORS CORP.
3. Lift window mirror switch up and out.
4. Disconnect electrical connector by locating retention tabs and disengaging connectors.
  
  Fig 2: Disengaging Connectors
  Courtesy of GENERAL MOTORS CORP.
Adjust front seats to most forward position.
Remove rear console screws.

Fig 3: Rear Console Screws
Courtesy of GENERAL MOTORS CORP.
Adjust front seats to most rearward position.
Remove left and right lower trim panel extensions by pulling outward at dual lock locations.
Rotate panels outward to disengage hinges from console.

Fig 4: Left And Right Lower Trim Panel Extensions
Courtesy of GENERAL MOTORS CORP.
Remove front console screws.
Move console rearward.
Disengage retaining tabs and disconnect power outlet connector.

Fig 5: Lower Trim Side Panels And Power Outlet Connector
Courtesy of GENERAL MOTORS CORP.
Maneuver console beyond gear selector and parking brake by lifting rear of console.
Remove console from vehicle.

Fig 6: Removing Console
Courtesy of GENERAL MOTORS CORP.