Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

Install the shift solenoid assembly from the shift control assembly.

Fig 1: View Of Shift Solenoid Assembly

Courtesy of GENERAL MOTORS CORP.

Connect the shift solenoid assembly wiring retainers to the shift control assembly.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the shift solenoid retaining screw.
Tighten: Tighten the screw to 3 N.m (27 lb in).
Install the shift indicator bulb from the shift control assembly.
Install the shift control assembly. Refer to Floor Shift Control Replacement in Automatic Transaxle - 4T40-E/4T45-E.