FixVault
Home › Saturn › 2003 › Ion 1 Automatic › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Repair Instructions › Ignition Lock Cylinder Replacement › Installation Procedure

Installation Procedure

    Fig 1: Turning Ignition Lock Cylinder To RUN Position
    GM874786Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: If you are installing a new lock cylinder, refer to Key and Lock Cylinder Coding in General Information.
  1. Position the lock cylinder in the run position. Insert the cylinder into the lock housing.
  2. Rotate the lock cylinder in the housing. Verify proper rotation.
  3. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  4. Enable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM in Airbag.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Battery.
About FixVault