Conditions For Running DTC
- DTCs P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0122, P0123, P0452, P0453, P0500 are not set.
- The ignition voltage is 11-18 volts.
- BARO sensor parameter is more than 81 kPa.
- Fuel level sensor parameter is 15-85 percent.
- ECT sensor parameter is 39-86°F (4-30°C).
- IAT sensor parameter is 41-90°F (5-32°C).
- The start-up ECT and IAT are within 16°F (9°C) of each other.
- Engine is running.
- Engine run time is less than 144 seconds.
- No vehicle speed DTCs are set in the Transmission Control Module (TCM).
- Accumulated purge flow is more than 350 grams.