FixVault
Home › Saturn › 2003 › L200 Automatic › Repair and Diagnosis › Engine Mechanical › Engine Mechanical › Repair Instructions › On Vehicle Repair Instructions › Engine Oil Pressure Sensor and/or Switch Replacement › Installation Procedure

Installation Procedure

  1. Apply the RTV sealant, or equivalent, to the EOP switch threads.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the EOP switch.

    Tighten:  Tighten the engine oil pressure switch to 10 N.m (89 lb in).

  3. Connect the EOP switch harness connector. Push in the connector until a click is heard, then pull back to confirm a positive engagement.
  4. Check the oil level and fill if low.
  5. Start the engine and check the engine for leaks.
About FixVault