DTC P0102: MAF Sensor Circuit - Low Signal/Frequency: Description
The Mass Airflow (MAF) sensor is an airflow meter that measures the amount of air entering the engine. The Engine Control Module (ECM) uses the MAF sensor signal in order to provide the correct fuel delivery for a wide range of engine speeds and loads. The MAF sensor signal is a function of the current required to keep the airflow sensing element at a fixed temperature. The air flowing through the sensor cools the sensing element. The amount of cooling is proportional to the amount of the airflow. As the airflow increases, more current is required in order to maintain the hot elements at a constant temperature. The MAF sensor converts the changes in current to a voltage signal that is read by the ECM. The ECM calculates the airflow based on this voltage signal. The MAF sensor uses the following circuits in order to operate:
- The ignition 1 voltage.
- The 5-volt reference.
- The MAF sensor signal.
- The low reference.
The 5-volt reference for the MAF sensor is also supplied to additional sensors. For 2 of the sensors, the voltage is supplied on separate ECM terminals. The other sensors are connected at a splice pack to the same 5 volt reference. The 5-volt reference is shared by the following sensors:
- The MAF sensor.
- The Camshaft Position (CMP) sensor.
- The Accelerator Pedal Position (APP) sensor 1.
- The Manifold Absolute Pressure (MAP) sensor.
- The Fuel Tank Pressure (FTP) sensor.
- The Exhaust Gas Recirculation (EGR) valve.
- The Air Conditioning (A/C) refrigerant pressure sensor.
The low reference circuit of the MAF sensor is shared at a splice pack with the following components:
- TP sensor 1 TP sensor 2.
- The Camshaft Position (CMP) sensor.
- The MAP sensor.
- The Intake Air Temperature (IAT) sensor.
- The EGR valve.
- The Engine Coolant Temperature (ECT) sensor.