FixVault
Home › Saturn › 2003 › L300 › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belts › Repair Instructions › Seat Belt Guide Replacement - Front › Removal Procedure

Removal Procedure

  1. Remove the carpet retainer molding. Refer to Carpet Retainer Replacement in Interior Trim.
    2. Fig 1: Removing & Installing Center Pillar Outside Weatherstrip
    GM896867Courtesy of GENERAL MOTORS CORP.
  2. Using a trim tool, remove the outside center pillar weatherstrip.
    3. Fig 2: Removing & Installing Front Shoulder Belt Height Adjuster Fasteners
    GM897246Courtesy of GENERAL MOTORS CORP.
  3. Remove the shoulder belt height adjuster fasteners.
    4. Fig 3: Locating Front Shoulder Belt Retractor Fastener Access Plug
    GM897238Courtesy of GENERAL MOTORS CORP.
  4. Remove the access plug to the shoulder belt retractor fastener.
  5. Remove the shoulder belt retractor fastener.
    6. Fig 4: Removing & Installing Center Pillar Upper & Lower Trim Moldings
    GM897213Courtesy of GENERAL MOTORS CORP.
  6. Remove the B-pillar molding plug and fastener.
  7. Starting at the top, gently pull on the center pillar upper molding to disengage the attaching clips.
  8. Pull on the center pillar lower molding to disengage the attaching clips.
    9. Fig 5: Identifying Front Shoulder Belt Guide Routing
    GM896736Courtesy of GENERAL MOTORS CORP.
  9. Remove shoulder belt from the shoulder belt retainer.
    10. Fig 6: Removing & Installing Front Seat Belt Guide
    GM896755Courtesy of GENERAL MOTORS CORP.
  10. Remove the safety belt guide fastener and remove the guide.
About FixVault