FixVault
Home › Saturn › 2003 › LW200 › Repair and Diagnosis › Electrical › Gauges › Instrument Panel, Gages, And Console › Repair Instructions › Console Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing & Console
    GM896495Courtesy of GENERAL MOTORS CORP.
  1. Position the console into the vehicle.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the console front fasteners.

    Tighten:  Tighten the fasteners to 2.5 N.m (22 lb in).

  3. Move the seats forward. Install the console rear fasteners.

    Tighten:  Tighten the fasteners to 2.5 N.m (22 lb in).

  4. Install the shift lever boot. Refer to Shift Control Boot Replacement in Automatic Transaxle - 4T40-E/4T45-E.
  5. Connect the console wiring harness to the main body harness located under the front console tray.
  6. Install the cupholder assembly. Refer to Cupholder Replacement .
  7. Install the power window switch, if equipped. Refer to Power Window Switch Replacement in Doors.
    8. Fig 2: Removing & Installing Park Brake Boot
    GM1230113Courtesy of GENERAL MOTORS CORP.
  8. Snap the park brake boot into place.
    9. Fig 3: Removing & Installing Console Trim Panels
    GM896493Courtesy of GENERAL MOTORS CORP.
  9. Install the console trim panels.
About FixVault