FixVault
Home › Saturn › 2004 › Ion 1 Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls (Introduction) › Repair Instructions › Accelerator Controls Pedal Replacement › Removal Procedure

Removal Procedure

  1. Remove the accelerator pedal retaining nuts.
    2. Fig 1: View Of Accelerator Pedal
    GM878828Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the cruise control cable, if equipped, from the accelerator pedal assembly.
    3. Fig 2: Locating Cruise Control Cable
    GM878823Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the accelerator cable and remove the accelerator pedal assembly.
    4. Fig 3: View Of Accelerator Cable
    GM878827Courtesy of GENERAL MOTORS CORP.
About FixVault