FixVault
Home › Saturn › 2004 › Ion 1 Automatic › Repair and Diagnosis › External Pages › Different car › Section 249 (Instrument Panel Trim And Console Trim) › Repair Instructions › Steering Column Opening Filler Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Compartment Release Switch Electrical Connector
    GM877797Courtesy of GENERAL MOTORS CORP.
  1. Connect the rear compartment release switch electrical connector.
    2. Fig 2: View Of I/P Filler Panel
    GM877793Courtesy of GENERAL MOTORS CORP.
  2. Align the retaining fasteners with the I/P.
  3. Push the filler panel in order to secure.
    4. NOTE: Refer to Fastener Notice .
  4. Install the filler panel screws.

    Tighten:  Tighten the filler panel screws to 2.5 N.m (22 lb in).

  5. Install the left I/P outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement .
About FixVault