FixVault
Home › Saturn › 2004 › Ion 1 Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls (Introduction) › Repair Instructions › Throttle Position (TP) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
  2. Disconnect the throttle position (TP) sensor harness connector (2).
  3. Remove the throttle TP sensor screw.
  4. Remove the TP sensor and seal.
    5. Fig 1: View Of Idle Air Control (IAC) Valve & Throttle Position (TP) Sensor
    GM783168Courtesy of GENERAL MOTORS CORP.
About FixVault