FixVault

Installation Procedure

  1. Connect the electrical connectors.
  2. Fig 1: View Of Amplifier Electrical Connectors
    GM875201Courtesy of GENERAL MOTORS CORP.
  3. Insert the amplifier rear tabs in the window shelf.
  4. Fig 2: View Of Amplifier
    GM865057Courtesy of GENERAL MOTORS CORP.
  5. Push up to engage the amplifier bracket forward clip.
  6. Raise the rear seat backs.
  7. Press down over the latch locations to ensure that the latches engage.
  8. Pull up on the seat backs to ensure that the seat back latches are fully engaged.
  9. Verify that the seat belts operate properly.