FixVault
Home › Saturn › 2004 › Ion Red Line › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Steering Wheel And Steering Column › Repair Instructions › Multifunction, Turn Signal Switch Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the multifunction turn signal switch to the steering column.

    Tighten:  Tighten the multifunction turn signal switch screws to 2 N.m (17 lb in).

  2. Connect the multifunction turn signal switch harness connector.
    3. Fig 1: View Of Multifunction Turn Signal Switch
    GM878308Courtesy of GENERAL MOTORS CORP.
  3. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
About FixVault