Installation Procedure

If equipped, install the ambient light sensor to the defroster grille. Turn the ambient light sensor body counterclockwise to lock the sensor into the defroster grille.

Fig 1: View Of Ambient Light Sensor

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the defroster grille center bolts.
Tighten: Tighten the defroster grille center bolts to 10 N.m (88 lb in).
Install the defroster grille outer screws.
Tighten: Tighten the defroster grille outer screws to 2.5 N.m (22 lb in).

Fig 2: View Of Defroster Grille

Courtesy of GENERAL MOTORS CORP.

Fig 3: View Of Defroster Grille Bolt Covers

Courtesy of GENERAL MOTORS CORP.

Install the left and right windshield garnish moldings. Refer to Windshield Garnish Molding Replacement in Interior Trim.
Align the cluster trim plate retaining fasteners with the center trim panel.
Push on the outer edge of the cluster trim plate in order to secure the retaining fasteners.
Install the screw retaining the cluster trim plate to the center trim panel.
Tighten: Tighten the cluster trim plate screw to 2.5 N.m (22 lb in).

Fig 4: View Of Cluster Trim Plate

Courtesy of GENERAL MOTORS CORP.

Fig 5: View Of Accessory Trim Plate Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Align the retaining fasteners with the I/P.
Push on the outer edge of the accessory trim plate in order to secure the retaining fasteners.
Install the left and right I/P outer trim covers. Refer to Instrument Panel (I/P) Outer Trim Cover Replacement .

Fig 6: Instrument Panel Bezel/Trim Plate

Courtesy of GENERAL MOTORS CORP.