FixVault

Installation Procedure

  1. Connect the rear compartment release switch electrical connector.
  2. Fig 1: View Of Rear Compartment Release Switch Electrical Connector
    GM877797Courtesy of GENERAL MOTORS CORP.
  3. Align the retaining fasteners with the I/P.
  4. Push the filler panel in order to secure.
  5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Install the filler panel screws.

    Tighten:  Tighten the filler panel screws to 2.5 N.m (22 lb in).

  7. Fig 2: View Of I/P Filler Panel
    GM877793Courtesy of GENERAL MOTORS CORP.
  8. Install the left I/P outer trim cover. Refer to Instrument Panel (I/P) Outer Trim Cover Replacement .