FixVault
Home › Saturn › 2004 › Ion Red Line › Repair and Diagnosis › Engine Performance › System › Engine Controls (Introduction) › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the intake air temperature (IAT) sensor harness connector.
  2. Remove the IAT sensor bolt.
  3. While twisting the IAT sensor (3), pull the sensor from the engine.
    4. Fig 1: Locating ECT Sensor, Boost Control Solenoid, & IAT Sensor
    GM1389396Courtesy of GENERAL MOTORS CORP.
About FixVault