FixVault
Home › Saturn › 2004 › Ion Red Line › Repair and Diagnosis › Engine Performance › System › Engine Controls (Introduction) › Repair Instructions › Manifold Absolute Pressure (MAP) Sensor Replacement (TMAP) › Removal Procedure

Removal Procedure

  1. Disconnect the temperature manifold absolute pressure (TMAP) sensor harness connector.
  2. Remove the TMAP sensor from the intake manifold.
    3. IMPORTANT: If the TMAP sensor seal is damaged, the TMAP sensor must be replaced.
  3. Inspect the seal for damage.
    4. Fig 1: Locating TMAP Sensor
    GM1382191Courtesy of GENERAL MOTORS CORP.
About FixVault