FixVault
Home › Saturn › 2004 › Ion Red Line › Repair and Diagnosis › External Pages › Different car › Section 113 (Power Door Lock System And Release Systems) › Repair Instructions › Power Door Lock Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Door Lock Switch
    GM888374Courtesy of GENERAL MOTORS CORP.
  1. Using a flat-bladed tool, pry the switch from the door trim panel enough to expose the locking tabs.
  2. Press the locking tab to remove the lock switch from the door trim panel.
  3. Disconnect the electrical connector.
  4. Remove the door lock switch.
About FixVault