Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 1: View Of Center High Mounted Stop Lamp Retainer Screws

Courtesy of GENERAL MOTORS CORP.

Install the center high-mounted stop lamp with screws.
Tighten: Tighten the center high-mounted stop lamp screws to 2.5 N.m (19 lb in).
Connect the electrical connector to the center high-mounted stop lamp.
Install the cover by placing the tabs in the slots. Gently press the cover into place.

Fig 2: View Of High-Mounted Stop Lamp Cover

Courtesy of GENERAL MOTORS CORP.