Installation Procedure
WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
- Position the side marker lamp to the fender.
- Install the side marker lamp retaining screw.
Tighten: Tighten the screw to 2.5 N.m (22 lb in).
- Install the side marker bulb/socket into the lamp housing by rotating the socket clockwise.
- Install the headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement .
- Close the hood.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.