FixVault
Home › Saturn › 2004 › Ion Red Line › Repair and Diagnosis › External Pages › Different car › Section 38 (Engine Controls - Introduction) › Repair Instructions › Air Cleaner Outlet Resonator Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the intake air temperature (IAT) sensor harness connector.
    2. Fig 1: View Of IAT Sensor Harness Connector
    GM851290Courtesy of GENERAL MOTORS CORP.
  2. Loosen the air cleaner assembly fresh air duct to resonator clamp.
  3. Remove the push-pin fastener from the air outlet resonator/duct assembly to support bracket.
    4. Fig 2: View Of Air Cleaner Outlet Resonator
    GM851256Courtesy of GENERAL MOTORS CORP.
  4. Loosen the resonator to throttle body clamp.
  5. Disconnect the air cleaner assembly fresh air duct from the resonator.
  6. Remove the air outlet resonator from the throttle body.
About FixVault