FixVault
Home › Saturn › 2004 › Ion Red Line › Repair and Diagnosis › External Pages › Different car › Section 47 (Wiper System & Washer System) › Repair Instructions › Washer Solvent Container Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the washer solvent container to the left frame rail.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the washer solvent container screw.

    Tighten:  Tighten the screw to 10 N.m (89 lb in).

    3. Fig 1: Locating Washer Solvent Container
    GM869670Courtesy of GENERAL MOTORS CORP.
  3. Connect the washer pump electrical connector.
  4. Connect the washer pump hose.
  5. Install the front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  6. Fill the washer solvent container with washer solvent.
About FixVault