FixVault
Home › Saturn › 2004 › Ion Red Line › Repair and Diagnosis › External Pages › Different car › Section 5 (Engine Controls (Introduction)) › Repair Instructions › Air Cleaner Assembly Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Verify full engagement of the inlet onto the resonator neck.
  1. Position the air cleaner assembly.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the air cleaner assembly attachment nut.

    Tighten:  Tighten the nut to 10 N.m (89 lb in).

  3. Connect the air cleaner resonator to the air cleaner assembly.

    Tighten:  Tighten the air cleaner intake duct clamp to 5 N.m (44 lb in).

    4. Fig 1: View Of Air Cleaner Assembly
    GM854291Courtesy of GENERAL MOTORS CORP.
About FixVault