Installation Procedure
WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
- Install the upper spring seat/jounce bumper on the spring.
- Raise the rear axle in order to seat rear spring. Refer to Coil Spring Replacement .
- Lower the vehicle.
IMPORTANT:
The rear springs are indexed with the colored tag toward the rear of the vehicle. No up/down or side to side orientation is required.