FixVault
Home › Saturn › 2004 › Ion Red Line › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Repair Instructions › Ignition Switch Replacement › Removal Procedure

Removal Procedure

  1. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  2. Disconnect the ignition switch harness connector.
  3. Turn the ignition switch to the run position.
  4. Remove the ignition switch screws.
    5. IMPORTANT: The ignition switch must be in the run position during removal in order to avoid damage to the ignition switch.
  5. Remove the ignition switch from the steering column.
    6. Fig 1: View Of Ignition Switch
    GM854768Courtesy of GENERAL MOTORS CORP.
About FixVault