FixVault
Home › Saturn › 2004 › L300 4D Wagon, 2.2 F › Repair and Diagnosis › Transmission › Automatic Trans › Shift Lock Control System › Repair Instructions › Shift Lock Solenoid/Switch Assembly Replacement › Installation Procedure

Installation Procedure

  1. Install the connector body to the control assembly.
  2. Install the park lock switch to the control assembly.
    3. Fig 1: Removing & Installing Park Lock Switch
    GM893820Courtesy of GENERAL MOTORS CORP.
  3. Insert the shift lock control solenoid electrical terminals into the connector body.
    Fig 2: Inserting Shift Lock Control Solenoid Electrical Terminals Into Connector Body
    GM893821Courtesy of GENERAL MOTORS CORP.
  4. Install the automatic transaxle control assembly. Refer to Shift Control Replacement in Automatic Transaxle - 4T40-E/4T45-E
  5. Enable the SIR system. Refer SIR Disabling and Enabling Zones in SIR.
About FixVault