FixVault

Removal Procedure

  1. Remove the wiper arms. Refer to Wiper Arm Replacement  .
  2. Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  3. Fig 1: Removing/Installing Wiper Motor Module Assembly
    GM929322Courtesy of GENERAL MOTORS CORP.
  4. Remove the wiper module bolts.
  5. Lift the wiper motor module away from the cowl.
  6. Disconnect the wire harness rosebud clip from the wiper module frame.
  7. Disconnect the wiper module electrical connector at the motor.