FixVault
Home › Saturn › 2004 › Vue Red Line, AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls (Introduction) -- 3.5L (L66) › Repair Instructions › Intake Air Temperature (IAT) Sensor 2 Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Intake Air Temperature (IAT) Sensor 2
    GM1233528Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Disconnect the IAT sensor harness connector.
  3. Remove the IAT sensor from the side of the intake manifold (5).
About FixVault