FixVault

Installation Procedure

    Fig 1: View Of Rocker Arm Oil Solenoid Valve
    GM1236195Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the NEW O-ring (415), solenoid (416) and bolts (417).

    Tighten:  Tighten the switch to 12 N.m (106 lb in).

  2. Install the splash shield. Refer toSplash Shield Replacement - Engine in Body Front End.
  3. Install the wheel. Refer toTire and Wheel Removal and Installation in Tires and Wheels.
  4. Lower the vehicle.