Removal Procedure

Remove the SIR module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
Remove the steering wheel. Refer to Steering Wheel Replacement .
Remove the SIR coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in SIR.
Using a thin-bladed screwdriver, remove the lock cylinder bezel.

Fig 1: View Of Steering Column Upper & Lower Shrouds Panels

GM898184

Courtesy of GENERAL MOTORS CORP.

Remove the shroud fasteners.
Remove the upper and lower shrouds.

Fig 2: View Of Multifunction Lever

GM928835

Courtesy of GENERAL MOTORS CORP.

Depress the lock tabs on the left and right multi-function levers. Remove the multi-function levers.

Fig 3: View Of Ignition Housing Electrical Connectors

GM928832

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical housing electrical connectors.

Fig 4: View Of Park Lock Cable Assembly & Ignition Module

GM944454

Courtesy of GENERAL MOTORS CORP.

Disengage the retaining tabs on the park lock cable assembly. Remove the assembly from the ignition module.

Fig 5: View Of Lock Housing Bolts

GM928840

Courtesy of GENERAL MOTORS CORP.

Remove the lock housing bolts.
Turn the ignition key to the ACC position

Fig 6: View Of Ignition Housing & Multi-Function Bracket

GM931160

Courtesy of GENERAL MOTORS CORP.

Separate the ignition housing from the multi-function bracket.
Remove the ignition switch screws
Remove the ignition switch.