FixVault
Home › Saturn › 2004 › Vue Red Line, AWD › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Repair Instructions › Multifunction Turn Signal Switch Housing Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Multifunction Lever
    GM928835Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  2. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  3. Remove the steering wheel. Refer to Steering Wheel Replacement .
  4. Remove the SIR coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in SIR.
  5. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  6. Depress the lock tabs on the left and right multifunction levers. Remove the multifunction levers.
    7. Fig 2: View Of Ignition Housing Electrical Connectors
    GM928832Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the housing electrical connectors.
    8. Fig 3: View Of Lock Housing Bolts
    GM928840Courtesy of GENERAL MOTORS CORP.
  8. Remove the lock housing bolts.
  9. Separate the ignition housing from the multifunction lever bracket. Slide the bracket from the column.
About FixVault