FixVault

Installation Procedure

    Fig 1: Steering Wheel & Nut
    GM877681Courtesy of GENERAL MOTORS CORP.
  1. Align the steering wheel to the steering column and install the steering wheel.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the steering wheel nut.

    Tighten:  Tighten the steering wheel nut to 41 N.m (30 lb ft).

  4. If equipped with cruise control, connect the cruise control switch connector.
  5. Install the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
  6. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.