Tools Required

J 36850  TRANSJEL™. See Special Tools .

1. Assemble the new accumulator piston seals (30) on the three accumulator pistons (29).
Fig 1: Identifying Accumulator Piston Seals
Courtesy of GENERAL MOTORS CORP.
2. Install the 1-2 and 2-3 accumulator assist springs (47, 125).
3. Install the accumulator pistons (29) into the channel plate over the guide pins. The pistons are identical. You can assemble the pistons in any of the three accumulator bores.
4. In order to retain the pistons, apply J 36850  onto the piston seals. See Special Tools .
5. Install the manual valve (800) into channel plate.