FixVault
Home › Saturn › 2005 › Ion 1 Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - Introduction & Repair Instructions › Repair Instructions › Floor Shift Control Replacement › Removal Procedure

Removal Procedure

    CAUTION: Refer to BATTERY DISCONNECT CAUTION in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the automatic transmission control lever handle.
    3. Fig 1: Identifying Automatic Transmission Control Lever Handle Retainer
    GM104490Courtesy of GENERAL MOTORS CORP.
  3. Remove the console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages and Console.
  4. Remove the range select lever cable (1) from the automatic transmission shift control.
  5. Remove the park lock cable from the automatic transmission shift control.
  6. Remove the electrical connector.
  7. Remove the automatic transmission control bolts.
  8. Remove the automatic transmission shift control.
    9. Fig 2: View Of Transmission Shift Control Assembly
    GM104495Courtesy of GENERAL MOTORS CORP.
About FixVault