FixVault
Home › Saturn › 2005 › Ion 1 Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - Introduction & Repair Instructions › Repair Instructions › Shift Control Replacement › Installation Procedure

Installation Procedure

  1. Install the shift control to the vehicle.
  2. Connect the shift lock solenoid harness connector.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the shift control nuts.

    Tighten:  Tighten the shift control nuts to 25 N.m (18 lb ft).

  4. Connect the shift cable to the shift control assembly.
    5. Fig 1: View Of Shift Control
    GM851244Courtesy of GENERAL MOTORS CORP.
  5. Install the console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages, and Console.
About FixVault