FixVault
Home › Saturn › 2005 › Ion 1 Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - Introduction & Repair Instructions › Repair Instructions › Shift Control Replacement › Removal Procedure

Removal Procedure

  1. Remove the console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages, and Console.
  2. Disconnect the shift cable from the shift control assembly.
    3. Fig 1: View Of Shift Control
    GM851244Courtesy of GENERAL MOTORS CORP.
  3. Remove the shift control nuts.
  4. Disconnect the shift lock solenoid harness connector.
  5. Remove the shift control from the vehicle.
About FixVault