FixVault

Removal Procedure

  1. Lift the pull cup liner.
  2. Remove the pull cup screws from the door trim.
  3. Using a small flat-bladed tool, pry the rearward end of the pull cup out of the door trim.
  4. Pull rearward to disengage the forward pull cup hook from the door trim.
  5. Fig 1: View Of Rear Door Trim
    GM865018Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the power window switch electrical connector.
  7. Disengage the locking tabs that hold the power window switch in the pull cup.
  8. Remove the switch from the pull cup.
  9. Fig 2: View Of Rear Door Power Window Switch & Electrical Connector
    GM865040Courtesy of GENERAL MOTORS CORP.