FixVault
Home › Saturn › 2005 › Ion Red Line › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction › Repair Instructions › Barometric Pressure (BARO) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the barometric pressure (BARO) sensor harness connector.
  2. Remove the BARO sensor bracket and bolt.
    3. Fig 1: Locating SCIP Sensor & BARO Sensor
    GM1389393Courtesy of GENERAL MOTORS CORP.
  3. Remove the BARO sensor (2).
About FixVault