FixVault
Home › Saturn › 2005 › Ion Red Line › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction › Repair Instructions › Manifold Absolute Pressure (MAP) Sensor Replacement (TMAP) › Installation Procedure

Installation Procedure

    IMPORTANT: Use the new TMAP sensor seal provided with the new TMAP sensor.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the TMAP sensor into the intake manifold.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

    2. Fig 1: Locating TMAP Sensor
    GM1382191Courtesy of GENERAL MOTORS CORP.
  2. Connect the TMAP sensor harness connector.
About FixVault