Installation Procedure
WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
- Install the mirror to the mounting pad.
- Tighten the set screw that retains the mirror base to the mounting pad.
Tighten: Tighten the mirror set screw to 2 N.m (18 lb in).
- Install the rearview mirror wiring harness.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.