FixVault
Home › Saturn › 2005 › L300 › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Negative Cable Disconnect/Connect Procedure › Installation Procedure

Installation Procedure

NOTE: Refer to Fastener Notice in Cautions and Notices.
IMPORTANT: Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the battery cable to the battery terminal.
  1. Connect the battery negative cable to the battery.

    Tighten:  Tighten the bolt to 17 N.m (13 lb ft).

  2. Reset the radio stations and the clock.
About FixVault