FixVault
Home › Saturn › 2005 › L300 › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction › Repair Instructions › Camshaft Position (CMP) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing Camshaft Position Sensor
    GM897184Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Disconnect the camshaft position (CMP) sensor harness connector.
  3. Remove the knock sensor 2 pigtail from the attachment clip.
  4. Remove the CMP sensor attachment bolt and remove the sensor.
About FixVault