FixVault
Home › Saturn › 2005 › L300 › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction › Repair Instructions › Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Mass Air Flow Sensor
    GM897187Courtesy of GENERAL MOTORS CORP.
  1. Install the MAF sensor to the air cleaner box with the attachment clamps. Make sure the clamps are tight.
  2. Connect the MAF sensor harness connector. Push the connector in until the lock position is felt, then pull back to confirm engagement.
About FixVault