Installation Procedure
WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
- On illuminated sunshade, connect the sunshade wiring connector.
- Route the wiring harness into the holes and install the sunshade with fasteners. Tighten: Tighten the sunshade-to-headliner fasteners to 15 N.m (11 lb ft).
- Snap the sunshade into the inner retainer clip.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.