FixVault

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the SIR through the I/P opening with the vinyl edge up and the harness on the right side of the vehicle.
  2. Fig 1: Removing & Installing Instrument Panel Inflatable Restraint Module
    GM896807Courtesy of GENERAL MOTORS CORP.
  3. Insert the SIR guide pins in the I/P brace slots and rotate the round edge upward to align the bolt holes.
  4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the bolts securing the SIR to the I/P support beam. Tighten:  Tighten the bolts to 10 N.m (89 lb in).
  6. Fig 2: Proper Orientation Of Instrument Panel Inflatable Restraint Module
    GM897925Courtesy of GENERAL MOTORS CORP.
  7. Connect the yellow 2-way connector to the vehicle wiring harness.
  8. Install the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
  9. Enable the SIR system. Refer to SIR Disabling & Enabling Zone 5 .
  10. Turn the ignition on and verify that the SIR telltale operates properly.