Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.

Install the accelerator cable bracket to the throttle body.

Fig 1: Removing & Installing Accelerator Cable Bracket

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the nuts and bolts.
1. Tighten:
  - Tighten the bolts to 10 N.m (89 lb in).
  - Tighten the nut to 13 N.m (115 lb in).
Connect the accelerator cable into the accelerator cable bracket.
Connect the accelerator cable cross slug to the throttle body slots.

Fig 2: Removing & Installing Accelerator & Cruise Control Cables From Accelerator Cable Bracket

Courtesy of GENERAL MOTORS CORP.

If applicable connect the cruise control cable to the throttle lever and accelerator bracket.

Fig 3: Identifying Cruise Control Cable

Courtesy of GENERAL MOTORS CORP.