FixVault
Home › Saturn › 2005 › L300 › Repair and Diagnosis › External Pages › Different car › Section 22 (Engine Controls - 2.2L (L61) (Introduction)) › Repair Instructions › Accelerator Controls Cable Bracket Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the accelerator and cruise control cables from the throttle body lever.
  2. Depress the tangs and remove the accelerator and cruise control cables from the accelerator cable bracket.
    3. Fig 1: Removing & Installing Accelerator & Cruise Control Cables From Accelerator Cable Bracket
    GM294522Courtesy of GENERAL MOTORS CORP.
    Fig 2: Identifying Cruise Control Cable
    GM319387Courtesy of GENERAL MOTORS CORP.
  3. If applicable disconnect the cruise control cable from the throttle lever and accelerator bracket.
  4. Remove the nuts and bolts holding the accelerator cable bracket to the throttle body.
  5. Remove the accelerator cable bracket.
    6. Fig 3: Removing & Installing Accelerator Cable Bracket
    GM12689Courtesy of GENERAL MOTORS CORP.
About FixVault