FixVault
Home › Saturn › 2005 › L300 › Repair and Diagnosis › External Pages › Different car › Section 44 (Front Suspension System) › Repair Instructions › Lower Control Arm Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the lower control into the frame using new bolts. Tighten:  Tighten the bolts to 90 N.m (66 lb ft) plus an additional 75 to 90 degrees.
  2. Install a new ball stud to steering knuckle pinch bolt and nut. Tighten:  Tighten the bolt and nut to 100 N.m (74 lb ft).
  3. Install the tire and wheel. Refer to Tire & Wheel Removal & Installation in Tires and Wheels.
  4. Lower the vehicle.
  5. Inspect the vehicle for alignment. Refer to Measuring Wheel Alignment in Wheel Alignment.
    6. Fig 1: Removing & Installing Lower Control Arm-To-Frame Bolts
    GM891615Courtesy of GENERAL MOTORS CORP.
    Fig 2: Removing & Installing Lower Control Arm Assembly From Steering Knuckle
    GM891570Courtesy of GENERAL MOTORS CORP.
About FixVault