FixVault
Home › Saturn › 2005 › L300 › Repair and Diagnosis › External Pages › Different car › Section 8 (Lighting Systems) › Repair Instructions › Ambient Light Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Ambient Light Sensor
    GM1236552Courtesy of GENERAL MOTORS CORP.
  1. Install the wire connector to the sensor.
  2. Push in the sensor assembly until fully seated.
About FixVault