FixVault
Home › Saturn › 2005 › L300 › Repair and Diagnosis › Steering › Steering Wheel & Steering Column › Repair Instructions › Ignition Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Ignition Switch
    GM881945Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors.
  2. Position the ignition switch.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the ignition switch fasteners.

    Tighten:  Tighten the ignition switch fasteners to 1.5 N.m (13 lb in).

    4. Fig 2: Removing/Installing Steering Column Trim Covers
    GM870643Courtesy of GENERAL MOTORS CORP.
  4. Install the steering column upper trim cover. Refer to Steering Column Trim Covers Replacement .
  5. Install the lock cylinder bezel.
About FixVault